Terratrip GeoTrip 303 +GPS and GLONASS V5

The 303 GeoTrip is a precise odometer that displays distance, speed, average speed, time, and lap times (lap times with optional display). GPS and GLONASS track up to 48 satellites simultaneously, which can ensure extremely high accuracy, typically within 0.17% of the distance traveled. The GeoTrip GPS/GLONASS is much more accurate than the built-in GPS in a smartphone or most car sat navs. Installation is simple with our bracket: you can attach it to the windshield with a suction cup or screw it to the vehicle, then connect it to the car's 12-volt power supply. No additional installation is required, but if you need a mechanical probe, you can also connect one or two. Connecting a probe provides the additional fallback feature: if the satellite signal is lost due to a tunnel or similar, the probe will automatically take over. If neither the mechanical probe nor the satellite signal is lost, the unit will estimate the distance traveled when the signal is restored.

New features include performance timing, which displays acceleration and deceleration from 0 to 60, 0 to 100, and 0 to xx (custom speed). Performance timing stores 8 results, which can be viewed in real time. An optional remote display (part number T016G) can be installed to show distance traveled, speed, or average speed. The remote display also features 7 LED indicators, used in regularity rallies, which show the driver the distance in seconds from the target speed. An optional remote reset unit is available, which can be used either by foot or hand.

• GPS and GLONASS enabled
• Display total distance up to 999.99 and interval up to 99.99
• Time of day, stopwatch, speed and average speed
• The time of day display automatically freezes when the stopwatch is stopped, making it easier for rally officials to check the time.
• Calibrate for miles or km
• 5-digit calibration
• Two probe inputs
• Two calibration numbers
• Speed ​​indication
• Manually adjustable total distance display
• Distance Fly by: Quickly adjust the distance display
• Count up and down function
• Split function (freeze)
• Electronic memory backup
• LED display backlight
• Full numeric keypad
• Optional remote display for speed, interval distance, or average speed. LED target speed indicators for consistency.
• Performance timers displaying: custom speed 0-60, 0-100, 0-xx. The timers also display deceleration times.
• Automatic calibration at any set distance
• Use GPS/GLONASS to calibrate the probes.
• HR model measuring up to 1 meter for road surveying

Download the technical sheet